None BD101K-07800-BR-NL Guía de instalación descargar pdf (Pagina 2)

BARN DOOR HARDWARE KIT

TOP OF DOOR STRAP

BD101K-07800

INSTALLATION GUIDE

Step 1. Door Preparation

Note, a second optional wall-mounted door guide has

also been provided in this kit should you not wish to

mortise your door.

Mortise 1/4" wide x 3/4" deep groove centrally to the bottom

of the door for use with the oor-mounted door guide. This

will ensure smoothness of door travel side-to-side and will

prevent the door from swinging in and out.

If you prefer, you can also have your door mortised at

the store you have purchased your door (typically, for an

additional charge). See your store for details.

3/4" (19mm)

1/4"

(6.3mm)

Step 3. Door Preparation – Anti-jump block Installation

Position each anti-jump block at least 1" from the edge of the

Straps. Tighten slightly to secure in place.

Step 2. Door Preparation – Strap Installation

Position each Strap a minimum of 4” from the edge of the

door and 1.5” from the top of the door.

Mark the rst hole with a pencil and pre-drill 3/8” holes, then

secure into place. Mark the second hole with the strap in

place to ensure the strap is secure. Repeat for second strap.

4" (101mm)

1 2 3 4 5 6

Sin comentarios

None BD101K-07800-BR-NL Guía de instalación Pagina 2