None UC12T518 Guía de instalación descargar pdf (Pagina 3)

D. Install plastic lens onto the fixture.

E. Restore power at fuse or circuit breaker box.

Wiring (Rocker Switch - Optional)

CAUTION

Check electrical power wires for damage or scrapes. If

power supply wires are within three inches of ballast use

wire suitable for at least 90°C (194°F).

ote:N Most dwellings built before 1985 have supply wire

rated to 60°C. Consult a qualified electrician before

installing.

A. Remove rectangular knockout from top of ballast cover

(2) before installing rocker switch.

B. Install rocker switch by pressing switch through

knockout.

C. Take black wire from rocker switch and attach it to

the black wire coming from the ballast. Use wire nuts

(included) to attach wiring in steps C through F. See

diagram provided.

D. Attach other rocker switch black wire to incoming black

input supply wire (HOT).

Installation Instructions – Undercabinet Fluorescent Fixture

101653-Mx ADF142140 www.eaton.com

ROCKER SWITCH

PRE-WIRED

TO SOCKETS

BLACKBLACK

BLACK

FIXTURE

WHITE

WIRE NUT (TYP)

FIXTURE GROUND (GREEN)

LOAD

HOT

COMMON

GROUND

SOURCE

E. Attach remaining wires together (white wire from

ballast to white input supply wires - COMMON).

F. Attach ground connection from main power supply (if

available) to green ground wire located inside fixture.

Bulb Replacement

The fixture uses either a T5 lamp or a T8 lamp. See carton

for lamp wattage and information.

1 2 3 4 5 6 7 8 ... 11 12

Comentarios a estos manuales

Sin comentarios

None UC12T518 Guía de instalación Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para No None UC12T518