search

None WSSPC5V Manual de uso y cuidado

Busca en linea o descarga Manual de uso y cuidado para No None WSSPC5V. none WSSPC5V Use and Care Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 1
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
PROBLEMS
POSSIBLE CAUSES
Pump does not run and hums
●Line circuit breaker is off, or fuse is blown.
●Water level in sump pit has not reached turn-on level
as indicated in installationdrawing.
●Pump cord is not making contact in receptacle.
●Float is stuck. It should operate freely in basin.
Pump runs but does not deliver water
●Check valve is installed backwards. Flapper should
open in direction of water flow.
●Discharge shut-off valve (if used) may be closed.
●Impeller or volute openings are fully or partially
clogged. Remove pump and clean.
●Pump is air-locked. Start and stop several times by
plugging and unplugging cord.Check for clogged vent
hole in pump case.
●Vertical pumping distance (“head”) is too high. Reduce
distance or increasediameter of discharge pipe.
Pump runs and pumps out sump pit, but does not stop
●Float switch is stuck in up/on position. Be sure float
switch operates freely in pit.
●Defective float switch. Replace with new float switch.
Pump runs but delivers only a small amount of water
●Pump is air-locked. Start and stop several times by
plugging and unplugging cord.Check for clogged vent
hole in discharge pipe.
●Vertical pumping distance (“head”) is too high. Reduce
distance or increasediameter of discharge pipe.
●Impeller or volute openings are fully or partially
clogged. Remove pump and clean.
Fuse blows or circuit breaker trips when pump starts
●Pump impeller is partially clogged, causing motor to
run slow and overload.Remove pump and clean.
●Motor stator may be defective.
●Fuse size or circuit breaker may be too small.
●Impeller or volute opening are fully or partially
clogged. Remove pump and clean.
Motor runs for a short time, then stops
●Inlet holes in pump base are clogged. Remove pump
and clean the openings.
●Motor stator may be defective.
●Impeller or volute openings are fully or partially
clogged. Remove pump and clean.
Vista de pagina 0
1

Indice de contenidos

Pagina 1 - POSSIBLE CAUSES

PROBLEMS POSSIBLE CAUSES Pump does not run and hums ●Line circuit breaker is off, or fuse is blown. ●Water level in sump pit has not reached turn-on

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para No None WSSPC5V
No None 30504_MP1 Manual de instrucciones   (1 paginas)
No None H270130 Guía de instalación   (1 paginas)
No None 82392053925 Guía de instalación    (2 paginas)
No None 32323MBRZ Guía de instalación   (2 paginas)
No None 60503 Manual de uso y cuidado  (1 paginas)
No None 50013SL Manual de instrucciones   (2 paginas)
No None 5510F3BXS Manual de instrucciones   (1 paginas)
No None SATIN-L144-120V Manual de instrucciones    (20 paginas)
No None I 2005 Manual de instrucciones   (3 paginas)
No None I 2361 Manual de instrucciones   (5 paginas)
No None I 3093 Manual de instrucciones   (4 paginas)
No None 52WH254DPFX Manual de instrucciones    (8 paginas)
No None I 8103 Manual de instrucciones   (3 paginas)
No None 17831HD Manual de instrucciones    (2 paginas)
No None S040-0386 Manual de uso y cuidado   (1 paginas)
No None MI4884-E Manual de instrucciones   (9 paginas)
No None TK-1VTX3-34 Guía de instalación   (2 paginas)
No None 32279BRZ Manual de instrucciones   (3 paginas)
No None 27395-WI Manual de instrucciones   (2 paginas)
No None 82392056148 Manual de instrucciones    (2 paginas)
  • AccuPower Elmira Stove Works Winchester-repeating-arms Thermo-fisher-scientific Boca
  • Oster Microondas Jasco Luces de trabajo Rode Trípodes Fring No Maytag Neveras
  • Philips 223S5LSB/00 Naxa NPB-246 Yamaha PSR-A2000 LG 28MT47D Acer V246HQL
  • Dell C2665dnf Manual de usuario Jvc KD-S6060 Manual de usuario Philips EP5333/10 Manual de usuario Samsung HT-BD2 Manual de usuario Samsung RL29THCTS Manual de usuario